cattle feed troughs

cattle feed troughs

cattle feed troughs

 

cattle feed troughs

When you install a system of livestock watering facilities, you will need  cattle feed troughs.

You can choose a setup that’s best for your land. Let’s take a closer at what’s available and what might work best for you. I’m here with Eddie Martin, a field engineer with the Natural Resources Conservation Service. Farmers have several choices when it comes to the type of livestock watering facility they choose to install. . They can !

They have the choice to use concrete tank which is a big round or square. They can have heavy-duty plastic tanks. They also can use equipment tires and if freezing is a concern, they can use ball waterers or freeze proof waterers. What does a farmer need to think about when he decides where to locate livestock watering facilities on his land? : There might be a place that he thinks he wants the watering facility but he also has to consider can he get water to it? Can he get power to his water source? And is it really going to fit in with his livestock grazing pattern? It’s better not to locate your watering facilities in a shady area because the dominant animals in the herd will keep the younger animals or the smaller animals from drinking during hot weather.https://betterhopeanimalcare.com/

You really don’t want to locate your mineral feeder near the water tank because the cows will over eat the mineral and eat more than they need. Your cattle should never have to walk more than 800 feet to get water from any part of the pasture. If we follow that rule, they’ll have better use of the entire pasture rather than just eating there close to the water tank. , how big do the tanks need to be? : The size of the tanks depend on the species using them, the number of animals in the herd, and the capacity of both the water source and the pipeline. The height of the tank depends on the age of the animals using the tank as well as the species of animals that you’re planning for. Lightweight tanks need protection from animal damage. So they need to be guarded by wooden or a large steel pipe guard post. There are two types of valves we use in watering troughs. The automatic valve works of a float system. The manual valve requires the operator to be there to put water in as the animals need water. All watering facilities should have a means to drain the tank to remove contaminants and sediment from time to time. You need to know the type of trough you’ll be using so that when you install your plumbing, the plumbing will be easy to access for maintenance purposes. Algae will grow in the water trough. So occasionally you will need to clean out the water trough by draining the trough and removing the algae. It’s easy to get all the information you need to install a system of livestock watering facilities for your animals. You can stop by any NRCS field office and pickup copies of the conservation standards

. For watering facilities, select NRCS standard number 6 one 4. The Natural Resources Conservation Service helping people help the land. let’s talk about heavy use area protection. Why is it important for farmers to protect the area immediately around their watering facilities? Watering facilities automatically create areas that will get a lot of hoof traffic and will quickly become eroded or muddy. Installing a surface of gravel or concrete around the watering facility will prevent that from happening. Of course this should be the last thing that you do. It’s the final part of livestock watering facilities installation. You can use either concrete or gravel to protect the area around your watering facilities. Concrete will require less maintenance than gravel.

A gravel heavy use area will require you to install nonwoven geotextile first as a base. You never want to use both concrete and gravel. The reason being if you install gravel on top of concrete it will injure animal hoofs. The size of the heavy use area depends on which species of animals will be using the watering facility area. Cattle typically need a heavy use area extending 10 feet in every direction from the edge of the tank or trough. For a gravel heavy use area, you’ll want to prepare a solid foundation. Any soft or monkey material should be removed and replaced with compacted earth. The compacted earth surface will need to be uniform and smooth before you install the nonwoven geotextile. Nonwoven geotextile is commonly called filter fabric and filter fabric should be installed in an excavation 6 inches below the finished grade. You’ll need to excavate a trench approximately a foot deep at the edge of the watering facility pad so that you can bury the filter fabric to keep it from rolling up. You should also overlap any joints in the nonwoven geotextile according to the manufacturer’s instructions. For gravel installations, be sure you choose an aggregate of a size that won’t injure your animal’s hooves. You’ll want the heavy use area to last as long as it possibly can. And that means from time to time, you’ll need to go back and recap it with gravel. You may decide to construct your heavy use area out of concrete. If you do, be sure to use a concrete that’s 3,000 psi or better and be sure your installation is at least 4 inches thick. You can check with your local NRCS office for requirements for reinforcement as well as the requirements for contraction and expansion joints.https://www.pinterest.com/pin/733101645573537900/

CATEGORIES
Share This

COMMENTS

Wordpress (0)
Disqus ( )